First, the specification of inkjet paper:

The size of the paper refers to the paper, after trimming cut, cut into a certain size. In the past is the number of "open" (such as 8 or 16 open, etc.) to express the size of the paper, and now China's adoption of international standards, the provisions of A0, A1, A2, B1, B2...... To indicate the size of the paper. The standard specifies the width of the paper (expressed in X) and the length (expressed in Y) is proportional to X:Y=1:N.

According to the basic area of the paper format, the format specification is divided into A series, B series and C series, format specifications:

A0 of the size of 841mm x 1189mm, with an area of 1 square meters;

B0 of the size of 1000mm x 1414mm, with an area of 2.5 square meters;

C0 of the size of 917mm x 1279mm, with an area of 2.25 square meters;

Copy paper format specifications only use A series and B series. If the A0 along the length of paper into two parts, will become the A1 specification, the A1 paper along the length direction of, will become the A2 specifications, so to open to the A8 specification; B8 paper also according to the method of opening to B8 specifications.

Two, red dot inkjet material size and size specification:

(1) the printing size depends on the width of the red dot material; digital printing said outdoor inkjet printing materials, the most common is light cloth (light box cloth), its size is limited to five meters wide, wide common are: 1.2, 1.5, 1.8, 2, 2.2, 2.5 2.8, 3, 3.2, 5 meters, 5 meters wide printing cloth will be much higher than the price of 3.2 below the width of cloth; the length of each volume of these materials is usually 70-100M. The detailed classification is listed as follows:

520 outer light inkjet cloth width: 2.02M, 2.2M, 2.5M, 2.8M, 3.0M, 3.2M

530 outer light inkjet cloth width: 1.22M, 1.42M, 1.62M, 1.82M, 2.02M, 2.2M, 2.5M, 2.8M, 3.0M, 3.2M.

550 inside the light inkjet cloth width: 1.22M, 1.42M, 1.62M, 1.82M, 2.02M, 2.2M, 2.5M, 2.8M, 3.0M, 3.2M. Under normal circumstances, the width of 2.02M than the width of the material thickness of 2.02M than the following to a little thicker.

Cableplus printing cloth: 2.2M, 2.5M, 2.8M wide, 3.2M. This material dosage is generally small.

Cableplus printing cloth width: 2.2M, dumb 2.5M, 2.8M, 3.2M. This kind of material is more common than thick cloth.

Thickening of the inside of the lamp cloth: thickness and brightness and 5M within the lamp cloth, it is commonly used for: 3.2M.

Crystal color grid reflective inkjet cloth: such as fish scales, glittering, thick material is favored by Hongkong customers, the current specifications are: 2.7M.

Large hole mesh printing cloth width: 2.5M or 2.6M, 2.8M, 3.2M.

Small hole mesh spray cloth width: 3.2M (supply and the amount of small).

A mesh width: 2.6M, 3.2M.

Outdoor banner cloth width: 0.914M, 1.27M, 1.52M, 1.82M.

(2) outdoor printing materials, body stickers also occupy a large proportion of different brands of different width as follows:

Lida mark white sticker specifications: 1.26M, 1.4M, 1.55M. (1.0M and 1.55M materials to be small)

Transparent sticker label Lida specifications: 1.26M, 1.4M. (1.0M and 1.55M sources are smaller)

Mactac black car specifications: 1.05M, 1.25M, 1.37M, 1.62M.

Domestic white / black bottom car specifications: 0.91M, 1.06M, 1.27M, 1.37M, 1.52M, 1.62M, 1.82M, 2.02M, 1.62M and 1.82M, 2.02M note: the materials are missing, the price expensive than any other specifications, and the installation is also larger, so the red dot printing experts do not recommend the use of these materials specifications.

(3) specifications for single hole penetration are as follows: 0.98M, 1.27M, 1.37M.

(4) similarly, the size of indoor painting depends on the width of the material; the general material and the relevant dimensions are as follows:

A, Touchi materials commonly used material name: PP gum, synthetic paper, removable adhesive, transparent adhesive, paper, film, matte film. Transparent double-sided adhesive (double mask).

B, indoor photo printing materials are generally four specifications;

C, width of 0.914M, 1.07M, 1.27M, 1.52M. the corresponding film width is also the proportion;

D light, specifications are: 0.914M, 1.07M, 1.27M, 1.52M, 1.6M.

E, other special indoor materials: silk cloth, indoor flag cloth, chemical fiber canvas, cotton canvas, etc.. The specifications are as follows: 0.914M, 1.27M, 1.52M.